| |
|
|
Clean surface before the decal is applied.
|
| |
|
| |
Temporarily place the decal in the desired
location on the item you are working on and tape the decal to the surface. |
| |
|
| |
Apply a
piece of masking tape along the top of the
decal like a hinge. |
| |
|
| |
Raising
the bottom of the decal, and begin to peel
the backing off the decal. |
| |
|
| |
Once the entire decal is applied to the
surface, go over the decal with the
squeegee, making strokes along face of the
decal. |
| |
|
| |
Remove the transfer tape covering the
decal slowly. |
| |
|
| |
If you
have bubbles cut little hole in them and
smooth them out. |
| |
|
| |
Most
bubbles will go way in a couple of weeks from
the heat of the sun. |
| |
|
| |
REMEMBER
Once the Decal touches the surface, it
cannot be moved again. Patience is the key. |